Ultimate 1000# Capacity Workbench Kit! | 8 Heavy Duty Corner Brackets Plus Bolt-On Rolling/Locking Wheels | For 4×4 Posts

Description

Build your own rugged and heavy-duty ULTIMATE 1000 LB. CAPACITY ROLL AROUND SHOP/GARAGE WORKBENCH TABLE with our USA made 1/8″ thick steel outside corner brackets and our post-to-wheel end brackets with welded on, locking/rolling wheel! Each wheel is rated at 250 pounds for an impressive half ton of rolling around ability for the set of four!

Each Kit includes the following:

  • Eight (8) Heavy-Duty 1/8″ Thick Steel Outside Corner Brackets
  • Four (4) 1/8″ Thick Steel Wheel Brackets with Welded-On Locking/Rolling Wheels

That’s Four (4) Corners for the top; Four (4) Corners for a lower level support/shelf; and Four (4) Locking Swivel Castors!  Build tip:  When designing your build, be sure to keep the bottom shelf brackets at least 4″ up from the bottom of the corner posts so that your Bolt-On Castor Brackets can be attached to the legs.

These wheels will not shear off like other castors when you roll around your heavy cart or hit a rock. Nope! They are 1/8” thick steel frames with welded-on locking castors!  We use all locking castors so it is easy to find two to step on & lock. Because they are step-lock, when you need to unlock, just lift lever with top of shoe. A lot easier than the kind with a mid-wheel pivot lock where you have to use your hand.

There are two 1/2″ holes on each of the top ears for fastening to your 4×4 leg. (The holes for the tables legs are offset so that if you want to thru bolt, you don’t have to worry about hitting any of the other installed bolts!)

All our brackets can be installed using any 1/2″ wood lag screws or 1/2″ thru bolts. If you use lag screws, we recommend 1/2″ x 2″ length, or 3” length. Home Depot and Lowe’s sell them in packs of 25 for a fair price. If you choose to thru bolt, go at least 1/2″ x 4.5″. Bolts/lag screws are not included with our brackets.

We also make Flat T brackets for joining other parts of your design, and Bent L’s for use as inside corners. And we make a Flat L, which is Flat like the T, but without the third leg.  Visit all our other website offerings here: https://posthugger.com/shop/

Any Questions? Feel free to reach out!

©2022 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.

Additional information

Weight 2 lbs
Dimensions 12 × 12 × 12 in
Bracket Shapes

Outside Corners, Flat T Brackets, Flat L Brackets, Bent L Inside Corners, Full Post Base, Wheel Brackets, Double Inside Corners, Three-Sided Corners