PostHugger™ 2-Piece Bracket Set For Actual Rough Cut 6″ x 6″ Beam Hanging Light Fixture Support – Made From 1/4″ or 1/8″ Plate Steel In USA!

$100.00$150.00

Clear

Description

Build your own custom hanging light fixture support system using our 2-piece, USA made PostHugger™ Bracket Set, constructed from either 1/4″ or 1/8″ thick steel brackets! (You will have to buy the beam, lag bolts and any chains, canopy, wiring, lights/fixtures, etc at your local home improvement store or online).  Note that the first picture is an actual customer picture and shows one beam, fully assembled with lighting installation.

This listing is for a 2-piece set of brackets made to fit a true 6″ x 6″ beam (not dimensional lumber of 5.5″ x 5.5″).  Our brackets can be installed using any 1/2″ wood lag screws.  The lags are not included with our bracket set; you must use your own hardware and beam.

Before buying, send us a message (to daniel@tflex-tech.com) with your actual beam size if your beam is different than an actual 6″ x 6″ rough cut beam.

These brackets are not flimsy/bendable metal. We make them using either 1/4″ or 1/8″ thick steel – a single corner bracket weighs just over 2 pounds – – strong enough to take what you throw at it (or what you throw it at!), but not so heavy where they are hard to work with.  We use 1/4″ steel, OR 1/8″ steel which is thicker than a Quarter and a Dime stacked on top of each other. Also unlike others who just cut and ship steel right off their table, we take the time to hand debur and wire brush both the inside and outside of every piece.

We are the original designer of the PostHugger™ brackets, which may be copied, but never equaled! 🙂 If you find a PostHugger™ knockoff, give us a chance to meet or beat their price.

This listing is for a 2-piece set of brackets made to fit a true 6″ x 6″ beam (not dimensional lumber of 5.5″ x 5.5″).  Our brackets can be installed using any 1/2″ wood lag screws.  The lags are not included with our bracket set.

Also please note that these ship as raw, unpainted steel. You can order them from us with a black powder coat, paint them the color of your choice, finish them with a clear coat, or allow to achieve a natural rust patina over time.

If you would like to see customer photos (and a video!) of some of our brackets in use, click the link https://riverdrivedesigns.com/photos provided in the short description at the top of the page.

© 2021 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.

Additional information

Weight 2 lbs
Dimensions 6 × 6 × 4 in
Material

1/4" Thick Steel, 1/8" Thick Steel

Finish

Unfinished Steel, Black Powder Coat Finish