Build your own rugged and heavy duty ROLL AROUND shop/garage table with our USA made 1/8″ thick steel end brackets with welded on, locking/rolling wheel! Each wheel is rated at 250 pounds for an impressive half ton of rolling around ability for the set of four!
These wheels will not shear off like other castors when you roll around your heavy cart or hit a rock. Nope! They are 1/8” thick steel frames with welded-on locking castors!
We use all locking castors so it is easy to find two to step on and lock. Because they are step-lock, when you need to unlock, just lift lever with top of shoe. A lot easier than the kind with a mid-wheel pivot lock where you have to use your hand.
This listing is for a SET OF FOUR of the bad boys. Add them to your cart or build a cart using our other brackets.
There are two 1/2″ holes on each of the top ears for fastening to your 4×4 leg. (The holes for the tables legs are offset so that if you want to thru bolt, you don’t have to worry about hitting any of the other installed bolts!)
Our brackets can be installed using any 1/2″ wood lag screws or 1/2″ thru bolts. If you use lag screws, we recommend 1/2″ x 2″ length, or 3” length. Home Depot and Lowe’s sell them in packs of 25 for under $15. If you choose to thru bolt, go at least 1/2″ x 4.5″. Bolts/lag screws are not included with our brackets.
You will receive a pack of 4 of our shop table wheel brackets.
If you want more, let us know!
We also make Corner Brackets, Flat T brackets for joining other parts of your design and make Bent L’s for use as inside corners. And we make a Flat L, which is Flat like the T, but without the third leg.
If you want to mix and match, just let us know how many of each you would like and we will set you up a listing.